CyberPower PDU15SW8RNET Instrukcja Użytkownika Pobierz pdf (Strona 29)

PowerPanel™ Business Edition

NCL Outlet

NCL stands for Non-Critical Load. Under the following conditions, the UPS will turn off the NCL outlet to

conserve battery power and maximize battery runtime for the remaining outlets:

z Turn Off Threshold: When supplying battery power, the UPS will power off this NCL outlet if the

remaining battery capacity is lower than this threshold.

z Turn Off Delay: When supplying battery power, the UPS will power off this NCL outlet after this delay

time is met.

z Turn On Delay: When the utility power is restored, the UPS will restore the output of this NCL outlet

after the delay time is met. This prevents excessive power consumption caused by all the connected

equipment starting at the same time.

Note: Not all models provide the same configurations. These configurations will vary by model.

Diagnostics

The UPS/Diagnostics page provides the ability to verify that the UPS can supply adequate battery runtime

for the connected computers to shutdown properly. Perform a complete runtime calibration to ensure an

accurate estimate of the runtime for the connected load. The buzzer can be tested to ensure that the UPS

can issue an alarm and that the indicator lights will display properly if requested by the UPS.

UPS/Diagnostics page

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 99 100

Brak uwag

CyberPower PDU15SW8RNET Instrukcja Użytkownika Strona 29